home *** CD-ROM | disk | FTP | other *** search
- Path: pil.idt.unit.no!torrunes
- From: torrunes@pil.idt.unit.no (Tor Rune Skoglund)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Blizzard 1230-IV , squirrel compatibility....
- Date: 11 Jan 1996 23:34:53 GMT
- Organization: University of Trondheim, Norway
- Message-ID: <4d46qt$qk7@due.unit.no>
- References: <1996Jan10.165540.4908@queens-belfast.ac.uk> <john.00b0@python.southern.co.nz>
- NNTP-Posting-Host: pil.idt.unit.no
-
- In article <john.00b0@python.southern.co.nz>,
- John Gulland <john@python.southern.co.nz> wrote:
- >
- >In article <1996Jan10.165540.4908@queens-belfast.ac.uk> G.Moran@ee.qub.ac.uk (Gavan Moran) writes:
- >>
- >> I've seen a post claiming that the 1230-IV will not work with a squirrel
- >> (or any other PCMCIA card). Is this the case or not? I'm about to get a
- >
- >If you are putting more than 4megs of extra RAM on your Blizzard then yes
- >you might have problems due to the PCMCIA slot wanting the same memory
- >address as the RAM.
-
- No. The B1230 maps all memory outside the autoconfig space.
- Squirrel should work just fine.
-
- - Best Regards,
-
- Tor Rune Skoglund DataKompaniet ans
- Tech. Manager/Partner Trondheim Innovation Centre
- Tel: +47 7354 0375 N-7030 Trondheim
- Fax: +47 7394 3861 Norway
- E-mail: datakompaniet@interlink.no
- WWW: http://www.interlink.no/datakompaniet
-